- Minimum Advertised Prices Shown -- call us for our everyday low prices.
- Additional savings (ie: quantity purchase) may apply at the time of purchase.
Contact us for details.
- Featuring the PowerCab 2.5 amp all-in-one system
- PowerPro 5 and 10 amp systems plus throttles available: tethered or wireless control
- Many software upgrades can be performed by the user!
- Decoders for N thru G scales - .75 to 8 amps
- Decoder Tester, turnout control, signaling and circuit breaker equipment available
- Computer interface circuitry available
- Complete instruction manuals are available at no charge from the NCE website.
- Custom Installation available - see us or call for information
• STARTER SETS
| PowerCab - All-in-one w/plug-in wall transformer - 2.5 Amp |
$151.95 |
| PH-Pro - Powerhouse Pro Starter Set |
423.95 |
| PH-Pro-R - Same as above with factory installed radio. Includes
RB01 Base Station |
559.95 |
| PH-10 - Powerhouse Pro - 10 Amp system |
519.95 |
| PH-10-R - Same as above with factory installed radio |
679.95 |
• SYSTEM COMPONENTS / BOOSTERS / POWER SUPPLY
| CS02 - Power Pro Command Station only (no cab or booster) |
$191.95 |
| PB105 - 5 Amp Booster - adds 5 amps additional power to layout |
127.95 |
| PB110 - 10 Amp Power Booster (for large scale only) |
215.95 |
| DB3 - 3 amp booster for any DCC system |
63.95 |
| SB3 - 3 Amp Smart Booster for Power Cab |
79.95 |
| P515 - 15vac, 5 amp supply for PH-Pro, PB105, Lenz®, etc |
39.75 |
| P114 - 14vdc, 2 amp power supply for Power Cab |
23.95 |
| P1018 - 18vac, 10 amp power supply for PH-10 |
79.95 |
• WALK-AROUND THROTTLES & ACCESSORIES
| ProCab - Deluxe Cab, Backlit LCD w/digital encoder, extra features |
$127.95 |
| ProCab-R - As above - with factory installed radio |
199.95 |
| CAB04p - Intermediate Cab - w/potentiometer speed knob |
71.95 |
| CAB04pr - As above - with factory installed radio |
143.95 |
| CAB04e - Intermediate Cab - w/digital encoder - 2 train control |
95.95 |
| CAB04er - As above - with factory installed radio |
159.95 |
| CAB05 - Intermediate Cab - w/speed buttons |
71.95 |
| CAB05R - As above - with factory installed radio |
143.95 |
| RB02 - Wireless Base Station w/expansion ports for 2 repeaters |
127.95 |
| RPT1 - Wireless Repeater w/expansion ports for 2 more repeaters |
103.95 |
| Antenna-HG - High Gain Antenna - 900 MHz |
13.55 |
| Antenna-RH - Shorter version of above |
8.75 |
• SIGNAL DECODERS - BLOCK DETECTORS - POWER CONTROL
| BD20 - DCC Block detector - .01 to 20 amps - newly enhanced |
$10.95 |
| Sig 4 - Signal decoder - controls 2 signal heads - built-in occupancy
detector. Works stand alone, DCC only or combination Supports all types of lighted
signals. Includes Sig-Net interface. Easy install & setup |
45.50 |
| Sig 12 - As above plus built in adjustable electronic circuit
breaker (3-5 amps) |
tba |
| EB1 - Single output electronic circuit breaker (10 amp) with
status LED’s |
23.50 |
| EB3 - Triple output electronic circuit breaker (2,3, 4 amps/output)
with status LED’s |
42.95 |
• ACCESSORY DECODERS - turnouts
| Switch-It - Accessory decoder for two (2) stall motor machines |
$18.75 |
| Snap-It - Accessory decoder for one (1) twin coil machine |
14.95 |
| Switch-Kat - Accessory decoder to control one (1) Kato remote
switch |
18.75 |
| Switch-8 - Acc. decoder for 8 Tortoise™ or SwitchMaster™ machines |
42.95 |
• DTK - DECODER TESTER KIT
| 8 & 9 pin plugs, JST harness - tests motor & 4 functions |
$19.50 |
• N & Z SCALE DECODERS (or HOn3 and small On30)
| Z14SR - Tiny Generic (wired) - 1 amp - 4 functions - 3” wires |
$27.25 |
| Z14SRP - Same as above - with NMRA 8 pin plug |
31.20 |
| N12SR - Generic N Scale sized - 1 amp - 2 functions - 3” wires |
23.35 |
| N12SRP - Same as above - with NMRA 8 pin plug |
27.25 |
| N14SR - Narrow Generic - 1 amp - 4 functions - 3” wires |
23.35 |
| N14SRP - Same as above - with NMRA 8 pin plug |
27.25 |
• HO SCALE DECODERS
| D13SR - Generic Decoder - 1.3 amp - 3 functrions |
$15.95 |
| D13SR - 4 pack pack of above |
59.95 |
| D13SR - 10 pack of above |
139.95 |
| D13SRP - Same as above with 4” wires and NMRA 8 pin plug |
20.75 |
| D13SRJ - Generic Decoder - 1.3 amp - 4 function with 9 pin JST
plug |
15.95 |
| D13SRJ4Pack - 4 pack of above |
59.95 |
| D14SR - Direct Plug-in Decoder - 1 amp - 6 functions |
23.95 |
| D15SR - 1.3 amp - 6 functions with 9 pin JST plug & wiring harness |
23.95 |
| D15SRP - As above with 9 pin JST to NMRA 8 pin plug |
27.95 |
| D18SR - Same as KRS-SR (below) but with 4 additional functions
(8 total) |
23.95 |
| DA-SR - Solder-in - Silent Running - 5 functions + D91 |
19.95 |
| DA-SR - 4 pack of above |
71.95 |
| P2KSR - Direct Plug-in to Life Like GP7, GP9, GP30, SD60 - 4
functions |
23.95 |
| KRS-SR - Direct Plug-in to Kato RS2, Stewart VO1000 - 4 functions |
23.95 |
| SW8-SR - Direct Plug-in to Life Like SW8, SW9, SW900, SW1200
- 3 function |
23.95 |
| ATL-S4 - Solder-in for Atlas S1, S2, S3, S4 - 2 functions |
23.95 |
| BachDSL - Replacement for Bachmann DCC equipped diesels |
15.95 |
• O & G SCALE DECODERS
| D408SR - Silent Running™ - 4 amps - 9 function (not for Chas
Ro or USA) |
$55.95 |
| Atlas Harness - Connects D408Sr to Atlas / Weaver / Lionel locos
with “dogbone” lightboard. Makes the D408SR a “Plug-n-Play” board |
10.35 |
| ATL-O - Plug-n-Play “dogbone” board for Atlas & some Weaver locos |
39.95 |
| D408E - Extended Output - 4 amps - 8 functions |
71.95 |
| D808 - Silent Running™ - 8 amp (30 amp stall) - 8 function -
for Chas Ro & USA |
87.95 |
• USB INTERFACE - Connects computer to Cab Bus
| USB computer interface for computer programming and/or operation
of your Power Cab equipped layout |
$38.95 |
- USB drivers for Windows, Mac OS X and Linux via internet download available
here from Silicon Labs.
• MINI PANEL - Build control panels for yards, towns, interlockings
- Use one button to control multiple switches or macros on your NCE DCC
- Up to 30 pushbuttons, toggle switches, block detectors, etc. can be connected
for control of turnouts, signals and other devices
- Easy programming, just plug in a ProCab
- Simple hook up, one Cab Bus connection and 2 wires for each pushbutton or
other input device
- Can be used to perform simple automatic train control and other layout automation
tasks
|
 |
• DCC PACKET ANALYZER
| DCC Packet Analyzer |
$39.95 |
- Convenient , easy connection to track or control bus
- View DCC packets being sent by command station in Hex or plain english
- Selectively filter out idle, reset, accessory, function and or speed packets
- Opto-isolated to prevent ground loops from DCC system to computer
- Can be powered from track or Cab Bus jack
- ICC packet analyzer compatibility mode (hex only display)
- Verbose mode makes it easy to decipher packets
- Additional Bonus: display NCE Cab Bus activity
Additional Requirements:
- PC or Mac running dumb terminal program capable of 38.4Kbps, 7 data bits
- 9 pin serial cable
• WIRING & CAB BUS ACCESSORIES + OTHER
| PCP - Power Cab Panel |
$15.50 |
| Auto SW - Automatic Switch for Power Cab Programming |
19.50 |
| UTP - Cab Bus facia panel - RJ12 connectors |
15.50 |
| UTP-DIN - Cab Bus panel with DIN connectors (preferred by clubs) |
15.50 |
| RJ12-7 cable - 7’ RJ cable for UTP / DIN panel wiring |
5.45 |
| RJ12-12 cable - as above but 12’ long |
6.25 |
| RJ12-40 cable - as avove but 40” long - for RPT1 wiring |
17.95 |
| Coilcord-RJ - 7’ coiled cord with RJ12 plugs on both ends |
7.75 |
| Coilcord-DIN - 7’ coiled cord with right angle DIN plug |
7.75 |
|
